A26361-K881-Z102-4-7619
11
2
Installation Steps: Overview
In this chapter you will find an overview of the steps necessary to install your
server system. Links guide you to sections where you can find more detailed
information on the individual steps:
Ê
At first, please take notice of chapter “Important Notes” on page 13 and the
following, especially of „Safety“.
Ê
Unpack the system, check the contents of the package for visible transport
damage and check whether the delivery agrees with the details in the
delivery note (see section “Unpacking the Server” on page 26).
Ê
Transport the server to the place where you want to set it up.
Ê
Make sure all necessary manuals (see section “Overview of the Documen-
tation” on page 1) are available; possibly print of the PDF files.
Ê
Set up the floorstand model (see section “Setting Up the Floorstand Model” on
page 27) or mount the rack model into the rack (see section
“Installing/Removing the Rack Model into the Rack” on page 29).
Ê
Cable the server. Please also refer to the section “Connecting Devices to
Server” on page 49 and section “Instructions on Connecting and Discon-
necting Cables” on page 52.
Ê
Connect the system to the line voltage (see section “Connecting the Server
to the Line Voltage” on page 51).
Ê
Make yourself familiar with the operating and indicator elements on the front
and on the rear side of the server (see section “Operating and Indicator
Elements” on page 55).
Ê
Configure and install the desired operating system and applications. To do
so, you have the following possibilities:
–
Remote configuration and installation with
ServerStart
:
With the
ServerStart
-CD provided, you can configure the server and install
the operating system in a convenient manner.
To find out how to operate
ServerStart
and for further information, refer to
the corresponding booklet „ServerStart Bundle“.
You find additional information for configuration section “Configuration
with ServerStart” on page 66).