A26361-K881-Z102-4-7619
7
Introduction
Features
Service and support
PRIMERGY servers are service-friendly and modular, thus enabling quick and
simple maintenance.
The handles and locks (touch points) of the different hot-plug/hot-swap compo-
nents are colored green to ensure simple and immediate recognition.
In order to avoid damage to components by incorrect handling when they are
being installed and removed, green highlighting also identifies the component
areas that can be touched without causing damage to the respective component.
PRIMERGY Diagnostic LEDs arranged on the system board identify the
component (memory module, CPU, CPU fans) on the system board that is not
functioning correctly.
The flash EPROM program supplied with the Fujitsu Siemens Computers
utilities supports a fast BIOS update. The
RemoteView
remote test and
diagnostics system allows the PRIMERGY TX300 server to be maintained from
remote locations. Remote diagnosis can be performed as a result for system
analysis, remote configuration and remote restart should the operating system
or hardware fail.
RemoteView
RemoteView
is the remote management solution from Fujitsu Siemens
Computers for Intel-based PRIMERGY systems.
RemoteView
3.0 and the
relevant hardware components integrated on the system board allow remote
monitoring and maintenance as well as fast restoration of operability in the event
of errors.
Remote monitoring and maintenance avoids time-consuming and costly on-site
repairs and reduces service costs. This leads to a reduction in the total cost of
ownership and an excellent return on investment for the remote management
solution.
RemoteView
helps
●
switch ON/OFF the system remotely
●
monitor systems and analyze the cause of faults
●
prepare error resolution or to have this process initiated independently if
possible
●
identify potential sources of error
●
configure the system
●
adjust system settings and initiate system restarts from a remote location.