Fujitsu Primergy TX300 S4, User Manual, Page: 267 / 276

267
PRIMERGY TX300 S4 User's Guide
D Remote Management Controller
This section explains functions and features of the Remote Management Controller
and the optional Remote Management Ctrl Upgrade kit (PG-RMCU2).
D.1 Overview of the Remote Management Controller
TX300 S4 has the Remote Management Controller (iRMC2) on the baseboard as a standard feature. The
Remote Management Controller provides the high-quality, high-reliability remote service board
function.
To use the console redirection function and the remote storage function, the license key of optional
Remote Management Ctrl Upgrade kit (PG-RMCU2) is necessary. For details of Remote Management
Controller Upgrade (PG-RMCU2), refer to "D.4 Remote Management Ctrl Upgrade kit (PG-RMCU2)"
(
J
pg.270).
„
Features of the Remote Management Controller
• The Remote Management Controller (iRMC2) and LAN are provided on the baseboard. This makes
possible to control power supply and reset of the server without depending on the state of the server.
• The console redirection function and the remote storage function can be used by optional Remote
Management Ctrl Upgrade kit (PG-RMCU2).
• It provides with LAN interface.
• It has the server monitoring function (monitoring server's hang/temperature/voltage).
• It has the server abnormality notification function (it is possible to notify abnormally at the server
hang).
• It is possible to display the server status and control power supply/reset of the server by using the
Web interface.
`
When the baseboard is replaced, the Remote Management Controller may have to be set again. In
case of reconfiguration, write down the set values in configuration sheets.