Fujitsu Primergy TX300 S4, User Manual, Page: 213 / 276

213
PRIMERGY TX300 S4 User’s Guide
7.2.15 Memory Status Submenu
This submenu appears when you select [Memory Status] from the [Server] menu.
It is for setting whether to allow the use of the installed memory modules.
table: Memory Status submenu
Item Setting Description
Memory Module 1A Enabled (Unchangeable)
Sets whether to enable the use of memory modules
in memory slots.
When "Disabled" or "Failed" is displayed, change
to "Enabled" after replacing a memory.
Memory Module 1B
Memory Module 2A
Memory Module 2B
Memory Module 3A
Memory Module 3B
Memory Module 4A
Memory Module 4B
Memory Module 1C
Memory Module 1D
Memory Module 2C
Memory Module 2D
Memory Module 3C
Memory Module 3D
Memory Module 4C
Memory Module 4D
PhoenixBIOS Setup Utility
Item Specific Help Memory Status
Select Item
Select Menu
Change Values
Select > Sub-Menu -/+
Enter
F1
Esc
Help
Exit
F9
F7 Setup Defaults
Save and Exit
Advanced Security Server Exit Main
Memory Module 1A:
Memory Module 1B:
Memory Module 2A:
Memory Module 2B:
Memory Module 3A:
Memory Module 3B:
Memory Module 4A:
Memory Module 4B:
Memory Module 1C:
Memory Module 1D:
Memory Module 2C:
Memory Module 2D:
Memory Module 3C:
Memory Module 3D:
Memory Module 4C:
Memory Module 4D: [Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]