Fujitsu Primergy TX300 S4, User Manual, Page: 202 / 276

202
Chapter 7 Configuring Hardware and Utilities
7.2.7 PCI Configuration Submenu
This submenu appears when you select [PCI Configuration] from the [Advanced] menu.
It is for PCI device settings.
table: PCI Configuration submenu
Item Setting Description
PCI SLOTS Configuration
Configures PCI slots.
PCI Slot 1 Configuration
Option ROM SCAN • Enabled (Initial value)
• Disabled
Sets whether to initialize the expansion ROM on
each PCI slot.
PCI Slot 2 Configuration
Option ROM SCAN
PCI Slot 3 Configuration
Option ROM SCAN
• Enabled
• Disabled (Initial value)
PCI Slot 4 Configuration
Option ROM SCAN
PCI Slot 5 Configuration
Option ROM SCAN
• Enabled (Initial value)
• Disabled
PCI Slot 6 Configuration
Option ROM SCAN
PCI Slot 7 Configuration
Option ROM SCAN
• Enabled
• Disabled (Initial value)
PCI IRQ Configuration
Sets PCI IRQ for each PCI slot.
PCI IRQ Line 1 Auto (Unchangeable)
Sets which PCI IRQ is allocated to which PCI slot.
PCI IRQ Line 2
PCI IRQ Line 3
PCI IRQ Line 4
PCI IRQ Line 5
PCI IRQ Line 6
PCI IRQ Line 7
PCI IRQ Line 8
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu -/+
Enter
F1
Esc
Exit
F9 Setup Defaults
Advanced Security Server Exit Main
PCI Configuration
PCI SLOTS Configuration
PCI IRQ Configuration >
>