Fujitsu PRIMERGY TX200 S2, User Manual

Page: 240 / 317

240
Chapter 8 Configuring Hardware and Utilities
8.2.7 PCI Configuration Submenu
Configures the PCI device.
table: Items on the PCI Configuration Submenu
Item Setting Description
PCI SLOTS Configuration Configures the PCI slots. Press the [Enter] key to display the [PCI SLOTS
Configuration] submenu window.
After purchasing a diskless type, when installing a RAID card such as PG-142E3 in
PCI Slot 1 to connect an internal hard disk unit, change the setting for [PCI slot1
Configuration Option ROM SCAN] to [Enabled].
PCI Slot 1 Configuration
Option ROM SCAN • Enabled
• Disabled (at the time of
purchase)
Sets whether or not to initialize the extended ROM in
each PCI slot.
This server has five slots.
PCI Slot 2 Configuration
Option ROM SCAN
PCI Slot 3 Configuration
Option ROM SCAN
PCI Slot 4 Configuration
Option ROM SCAN
PCI Slot 5 Configuration
Option ROM SCAN
PCI IRQ Configuration Sets PCI IRQs for the PCI slots. Press the [Enter] key to display the [PCI IRQ
Configuration] submenu window.
PCI IRQ Line 1–8 Auto (Fixed parameter) Sets the PCI IRQ.
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu -/+
Enter
F1
Esc Help
Exit F9
F10 Setup Defaults
Save and Exit
Advanced Security Server Exit Main
PCI Configuration
PCI SLOTS Configuration:
PCI IRQ Configuration: >
>