Fujitsu primergy TX150, User Manual

Page: 227 / 305

227
PRIMERGY TX150 S4 User’s Guide
8
Con
figurin
g Hardwa
re
a
nd utili
ties
8.2.8 Advanced System Configuration Submenu
Use this menu to configure the settings which are related to CPU, memory and USB.
table: Items on the Advanced System Configuration Submenu
Item Setting Description
ECC Memory Checking Enabled (Unchangeable)
Sets whether to enable or disable to check ECC
error of memory.
PCI Bus Parity Checking Enabled (Unchangeable) Sets whether to enable or disable the PCI bus parity
checking.
BIOS Work Space Location
Top of Base Memory
(Unchangeable)
Sets the location on the memory to assign the data
area that BIOS uses.
Hyper-Threading • Disabled
• Enabled (Initial value) Sets whether or not to run one CPU as a dual-
processing CPU. The setting [Enabled] may
enhance processing performance by allowing
maximum use of the processor resources.
This item is displayed only when Intel Pentium 4
processor is installed.
Limit CPUID functions Disabled (Unchangeable)
Sets whether or not to limit CPUID expanded
function. If the OS does not support expanded
function, the system may not start.
CPU Mismatch Detection Enabled (Unchangeable) Sets whether to enable or disable checking the CPU
type and frequency.
CPU Halt Mode (CIE) • Standard (Initial value)
• Enabled Configures the CPU internal setting.
This item is displayed only when Intel Pentium 4
processor is installed.
CPU Thermal Management • Standard (Initial value)
• Enabled Configures the CPU internal setting. This item is
displayed only when Intel CeleronD processor is
installed.
NX Memory Protection • Disabled (Initial value)
• Enabled
Sets whether to enable or disable "execute disable
bit function" of processor.
Item Specific Help
Change Values -/+
F9
Select Item
Select Menu
Select Sub-Menu Enter
F1
Esc
Help
Exit
F7
Mod. Defaults
Previous Values
Advanced Security Server Exit Main
If all memory in the
systm supports parity
(x72) this selections
enables ECC mode.
Advanced System Configuration
ECC Memory Checking:
PCI Bus Parity Checking:
BIOS Work Space Location:
Hyper-Threading:
Limit CPUID functions:
CPU Mismatch Detection
CPU Halt Mode(C1E):
NX Memory Protection:
CPU Timeout Counter
Enhanced SpeedStep:
CPU MC Status Clear:
Discard Timer Mode:
[Enabled]
[Enabled]
[Top of Base Memory]
[Enabled]
[Disabled]
[Enabled]
[Standard]
[Disabled]
[Enabled]
[Disabled]
[Next Boot]
[1024 clocks]