94
Operating Manual
TX150
S6
Hot-plug components
CSS components
8.1.2
Hot-plug hard disk drives
In PRIMERGY TX150 S6 Server you can use up to six 3.5-inch SAS hard disk
drives, up to four 3.5-inch SATA hard disk drives or up to eight 2.5-inch SAS hard
disk drives.
The hard disk drives which can be ordered for the PRIMERGY TX150 S6 are
supplied already mounted in an installation frame so that defective drives can
be replaced and new drives can be added during operation. The hard disk drive
and installation frame together make up the HDD module.
V
CAUTION!
●
The hard disk drive must not be removed from the installation frame
by anyone except a service technician.
●
The HDD modules (drives) must all be marked clearly so that they
can be put back in their original places after an upgrade. If this is not
done, existing data can be lost.
●
The hot-plug function is only possible in conjunction with a corre-
sponding RAID configuration.
Further information about RAID configurations or RAID levels is
available in the RAID controller documentation.
V
CAUTION!
Hybrid operation using both SAS and SATA hard disk drives is not
supported.
