Fujitsu PRIMERGY TX1310 M5, Upgrade And Maintenance Manual, Page: 97 / 265

8 Fans
8.1 Safety notes
CAUTION
▶ Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.
▶ Devices and components inside the server remain hot after
shutdown. After shutting down the server, wait for hot components
to cool down before installing or removing internal options.
▶ Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic-sensitive devices (ESDs).
▶ Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
▶ If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
▶ The procedure of installation on this notes might change depending
on a configuration of options.
▶ For more information, see "Important information" on page 25 .
8.2 Basic information
CAUTION
Since the system fans are not redundant they have to be replaced
immediately in case of defects or pre-failure events.
TX1310 M5 Upgrade and Maintenance Manual 97