Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual Download Page 230

Page: 230 / 265

17.2.2 Server front

17.2.2.1

Connectors on the server front

Figure 156: Connectors on the server front

USB 3.2 Gen2 (20 Gbps) Type C
connector (5V/3A) (1x)

USB 3.2 Gen1 (5 Gbps) connector (1x)

Some of the devices that can be connected may require special drivers

(see the documentation for the connected device).

17.2.2.2

Indicators on the front panel

Figure 157: Indicators on the front panel

Power-on indicator

HDD/SSD activity indicator

Power-on indicator (1)

Status

Description

off

The server is switched off.

white on

The server is in standby mode.

Appendix A

230

Upgrade and Maintenance Manual

TX1310 M5

Summary of Contents for PRIMERGY TX1310 M5










































































































































































































































































Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews:

Fujitsu PRIMERGY TX1310 M5, Upgrade And Maintenance Manual, Page: 230 / 265

Search results

Summary of Contents for PRIMERGY TX1310 M5

Reviews: