Fujitsu Primergy TX120 User Manual Download

Page: 57 / 263

PRIMERGY TX120 User’s Guide

OS In

llation

sing ServerS

3.1.3 RAID and Disk Wizard

Configure RAID, and create and format hard disk partitions.

Click [RAID and Disk Wizard: RAID configuration and hard disk partitioning /
formatting].

The [Configuration for Disks and RAID Controllers] window appears.

Only array controllers already installed are displayed.

Select the method of RAID configuration.

To install the OS while maintaining the established RAID environment

Select [Logical Drive View], and add partitions as necessary. For more details, refer to "

Installation While Maintaining the Established RAID Environment" (

pg.58).

To configure RAID

Select [Mass Storage Controller View], and add controllers as necessary. For more details, refer
to "

Configuring RAID" (

pg.58).

Set items and click [leave wizard].

The RAID and Disk wizard closes.

Summary of Contents for Primergy TX120








































































































































































































































































Search results

Summary of Contents for Primergy TX120

Reviews:

Related manuals for Primergy TX120

Brands by name

Popular brands

Fujitsu Primergy TX120, User Manual

Search results

Summary of Contents for Primergy TX120

Reviews:

Related manuals for Primergy TX120

Brands by name

Popular brands