Fujitsu Primergy TX120, User Manual

Page: 257 / 263

257
PRIMERGY TX120 User’s Guide
Ap
pend
ix
E External Floppy Disk Drive (USB)
Notes on Usage
The section explains notes on the usage of USB connected floppy disk drive.
„
Notes on Floppy Disk Drive Recognition at Server Startup
If the floppy disk drive (USB), with a floppy disk inserted, is not connected at server startup, BIOS
cannot recognize the floppy disk drive (USB). During OS installation of Windows/Linux, using
Windows Automatic System Recovery (ASR), or the Disaster Recovery Option of BrightStor ARCserve
Backup, make sure to connect the floppy disk drive (USB) with a floppy disk inserted before server
startup.
„
Notes on Floppy Disk Media Exchange Recognition when Installing
Windows Manually and at System Recovery
When performing system recovery using Windows backup data with the following software, also when
installing Windows manually, system recovery/installation might not be performed properly. This is
caused by the device driver being unreadable due to recognition failure of the floppy disk media
replacement.
• BrightStor ARCserve Backup Disaster Recovery Option
• Windows Server 2003 Automatic System Recovery Function
After pressing the [Enter] key in accordance with the procedures on the screen, if the floppy disk access
LED on the floppy disk drive (USB) does not turn on and the floppy disk is not accessed, follow the
procedures below.
1
Eject the floppy disk and wait for 2 seconds or longer, then press the [Enter]
key several times.
2
Insert the floppy disk and wait for 2 seconds or longer, then press the [Enter]
key.
If the floppy disk cannot be accessed, perform the procedures above again.