Fujitsu Primergy TX120, User Manual

Page: 249 / 263

249
PRIMERGY TX120 User’s Guide
Ap
pend
ix
(Window example)
C.2 Remote Power Supply Control
This section explains how to control the server power supply remotely.
The server power supply can be remote-controlled with the terminal software on the PC.
„
Starting Up the Remote Controller
1
Start up the terminal software.
The remote control window appears.
Power state is displayed next to "Power Status:".
table: Meaning of [Power Status]
Display Description
On The server is powered on.
Off The server is powered off.
****************************************
* Welcome to PRIMERGY Remote Manager *
* Firmware Revision x.xxA (x.xx) *
* SDRR *.** ID 0203 TX120 *
* Firmware built xxx xx xxxx xx:xx:xx *
****************************************
System Type : PRIMERGY TX120
System ID : xxxxxxxx
System Name : TX120-2 (xxx.xxx.xxx.xxx)
System OS : xxxxxxxx
System Status: OK
Power Status : On
Please enter user name :
Please enter pass phrase :