Fujitsu Primergy TX120, User Manual

Page: 233 / 263

233
PRIMERGY TX120 User’s Guide
9
Op
eration
a
nd
Mainten
ance
z
Changing / Deleting Passwords
If a password is already set, perform the above password setting operations to display the password
change window.
• To change the password, perform the following settings and press the [Enter] key.
• To delete the password, enter the current password, and then press the [Enter] key without entering
anything in the second and third fields. The status of "Setup (System) Password" changes to "Not
installed".
` The system shuts down after three invalid password entries. If this happens, turn off the server, turn it
back on, and then enter the correct password.
` If you forgot your password and cannot start the server, change the jumper setting on the baseboard to
reset the passwords. For jumper settings, refer to "8.1 Jumper Settings" (
J Pg.190).
9.4.3 Security When Disposing of the Server
„
Notes regarding the Deletion of Data from the Hard Disk When
Disposing of or Transferring the Server
When disposing of or transferring a server that has been used, the data in the hard disk may be read and
used unscrupulously. To prevent confidential or important data from leaking out, the data on the hard
disk must be wiped before disposal or transfer.
However, wiping the hard disk is not an easy task. Simply initializing (formatting) the hard disk or
deleting the files may give the pretense that the data no longer exists, but in reality the data is simply no
longer accessible to the OS, and it is still accessible to malicious individuals that can restore the data.
Therefore, if confidential or important data is saved to the hard disk, in addition to the operations
mentioned above, it is recommended to use third-party tools or services to wipe the data completely
from the disk to prevent its restoration.
When disposing of or transferring the server, it is the customer’s responsibility to wipe data contained in
the hard disk in order to prevent such important data from leaking.
Also, if software license agreements prohibit unauthorized distribution of software (OS or application
software), transferring the server without removing the software may violate the license agreements.
These issues must be taken into consideration.
Set Setup(System) Password:
Enter Current Password [ ]
Confirm New Password [ ]
Enter New Password [ ]
Enter the current password
Enter the new password
Enter the new password again for confirmation