Fujitsu Primergy TX120 User Manual Download

Page: 230 / 263

230

Chapter 9 Operation and Maintenance

Exiting Server Management Tools

Press the [Esc] key in the SYSTEM EVENT LOG window.

The power can be turned off when the DOS prompt is displayed.

9.3.2 Saving/Deleting the System Event Log

Saving the Log

Start Server Management Tools to display the SYSTEM EVENT LOG window.

Press the [F2] key.

Enter the name of the file to save the log to, and press the [Enter] key.

The log is saved to the floppy disk under the specified file name.

Deleting the Log

Start Server Management Tools to display the SYSTEM EVENT LOG window.

Press the [F3] key.

Press the [Enter] key.

This deletes the log.

Summary of Contents for Primergy TX120








































































































































































































































































Search results

Summary of Contents for Primergy TX120

Reviews:

Related manuals for Primergy TX120

Brands by name

Popular brands

Fujitsu Primergy TX120, User Manual

Search results

Summary of Contents for Primergy TX120

Reviews:

Related manuals for Primergy TX120

Brands by name

Popular brands