Fujitsu Primergy TX120, User Manual

Page: 202 / 263

202
Chapter 8 Configuring Hardware and Utilities
8.2.10 IPMI Submenu
Use this submenu to configure server management settings.
Power Off Source
Power Button Enabled (Unchangeable) Sets whether or not to allow the use of the power
switch for turning the power off, when the ACPI
function is disabled.
Power Failure Recovery • Always On
• Always Off
• Previous State (Initial
value)
Sets whether to turn the power on or off after a
temporary main power outage due to power
interruption, etc.
Note:
` For UPS scheduled operation, set to
[Always On]. Otherwise, the power may
not be turned on at the specified time.
table: Items on the IPMI Submenu
Item Setting Description
SEL Load Displays the usage of event log space as a percentage.
Clear System Event Log Disabled (Unchangeable) Sets whether or not to clear the event log.
Event Log Full Mode Overwrite
(Unchangeable) Sets whether or not to overwrite the event log when
space available for it becomes full.
Note:
` Changing this setting deletes the existing
event log. Before making changes, refer to
"9.3.1 How to Use Server Management Tools"
(
J pg.228) for saving the event log.
iRMC Time Sync
Enabled (Unchangeable) Synchronizes the internal clock of the Baseboard
Management Controller (BMC) with the system
time.
table: Items on the Power On/Off Submenu
Item Setting Description
Item Specific Help
Change Values
Enter
F9 Select Item
Select Menu
Select Sub-Menu
-/+
F1
Esc Help
Exit
F10
Setup Defaults
Save and Exit
Advanced Security Server Exit Main
IPMI
xx%
[Disabled]
[Overwrite]
[Enabled]
SEL Load
Clear System Event Log
Event Log Full Mode
iRMC Time Sync
System Event Log
SDRR Browser
LAN Setting