Fujitsu Primergy TX120, User Manual

Page: 195 / 263

195
PRIMERGY TX120 User’s Guide
8
Con
figurin
g Hardwa
re
a
nd utili
ties
8.2.3 Standard IDE Submenu
Use this submenu to set the type and operating mode for connected IDE devices. When the drives are
installed to Standard IDE Master or Standard IDE Slave, each menu is displayed. Displayed items differ
from drive to drive.
table: Items on the Standard IDE Submenu
Item Setting Description
PIO Mode PIO 4
Displays the current PIO (Programmed I/O)
transfer mode. The fastest PIO transfer mode
among connected IDE devices is automatically set.
DMA Mode UDMA 2 Displays the current DMA (Direct Memory Access)
data transfer mode. The fastest DMA transfer mode
among connected IDE devices is automatically set.
Firmware
Displays the version of the firmware.
Item Specific Help Standard IDE: [******]
Select Sub-Menu Enter
F9
Select Item
Select Menu
Change Values -/+
F1
Esc Help
Exit
F10
Setup Defaults
Save and Exit
Advanced Security Server Exit Main
PIO Mode:
DMA Mode:
Firmware: PIO 4
UDMA 2
****