Fujitsu Primergy TX120, User Manual

Page: 19 / 263

19
PRIMERGY TX120 User’s Guide
1
Overview
z
Wizard Window
Clicking a wizard displays a wizard window.
Set items in the wizard window. To move to a step in the next wizard window, click the operation button
at the bottom of the window. Clicking [help] displays a tip for setting the item.
„
Network Configuration
ServerStart can configure a network at server installation.
For details on available network patterns, refer to "Using ServerStart to Configure the Network".
„
Automatic Driver Installation
Recommended drivers for automatically recognized expansion cards are installed with the server. This
prevents possible mistakes in driver installation, such as installation of an older version or drivers which
were not supplied with this server.
„
Automatic RAID Configuration
When an array controller card is used, specify the RAID type and the number of hard disk units before
starting installation. A storage system can be configured without starting the RAID utility.
„
Remote Installation
Using ServerStart, you can store resources necessary for installation, such as the OS and ServicePack, in
another server on the network, and install the OS via the network. This method is convenient when the
server does not have a CD-ROM or floppy disk drive.