Fujitsu Primergy TX120, User Manual

Page: 164 / 263

164
Chapter 7 Installing Hardware Options
7.3 Installing Memory Modules
Additional memory will help increase the amount of data that can be read at a time
and improve the server processing capability.
• When installing or removing memory, turn off the server, all peripheral
devices, and any other connected devices. Also unplug all power cables from
the outlet.
Failure to do so can cause electric shock.
• Use our genuine memory modules only.
Failure to do so may cause a device failure, fire, or electric shock.
• Wait for a sufficient period of time after server shutdown before installing or
removing memory.
Failure to do so can cause burns.
injury
• When installing or removing memory, make sure to remove the screws at the
specified locations only. There is a risk of injury if screws other than those at
the specified locations are removed. This could also damage the server.
• Touch only the specified part of the printed circuit board.
Failure to do so could cause injury or damage the server.
• Memory modules are made of delicate components that are extremely
sensitive to static electricity, and they can be destroyed by static electricity
from your clothes or body. Before handling them, first touch some metallic
object to discharge static electricity.
• Do not insert and remove memory modules repeatedly. This could damage
the server.
• Hold the edges of the memory module, as shown in the figure below. Do not
touch the gold contacts and memory chip.
Do not touch this part.
Memory module
Memory chip