Fujitsu Primergy TX120, User Manual

Page: 136 / 263

136
Chapter 5 Operations after OS Installation
5.4.1 Creating a Hardware Configuration Tool
This section explains how to create a Hardware Configuration Tool from the ServerStart CD-ROM.
Prepare floppy disks as many as the tools you want to create beforehand.
Types of a Hardware Configuration Tool vary by model.
„
Starting ServerStart
z
For Creation on a Client Computer
1
Insert the ServerStart Disc 1 CD-ROM into the client computer's CD-ROM
drive.
2
Click [Start]
→
[Programs]
→
[Fujitsu ServerStart]
→
[ServerStart].
ServerStart starts up and the [Welcome to ServerStart] window appears.
z
For Creation on the Server
1
Turn on the server and insert the ServerStart Disc 1 CD-ROM immediately after
that.
ServerStart starts up and a message prompts you to insert the ServerStart floppy disk.
2
Insert the attached "ServerStart floppy disk" into the server's floppy disk drive.
Then make sure "Removable media" and "A:" are selected and click [Create].
A network setup window for remote installation appears.
`
If a configuration file already exists in the ServerStart floppy disk and [OK] is clicked without
clicking [Create], the [ServerStart Unattended Mode] window appears. Make sure to click
[Exit]. The [Welcome to ServerStart] window appears.
If [Start] is clicked in the [ServerStart Unattended Mode] window, the installation of the server
will start and all disk contents will be deleted.