Fujitsu Primergy TX120, User Manual

Page: 119 / 263

119
PRIMERGY TX120 User’s Guide
4
Manu
al OS In
st
a
llation
„
Updating the LAN Cards
Perform the following procedures on all LAN device names under [Network adapters] in [Device
Manager].
1
Click [Start]
→
[Administrative Tools]
→
[Computer Manager].
2
Click [Device Manager].
3
Double-click a LAN device name under [Network adapters].
`
Names of the LAN devices are displayed as follows.
4
Insert the driver disk created from the ServerStart CD-ROM into the server, it is
according to the installed LAN device.
5
Click [Update Driver] in the [Driver] tab window.
The "Welcome to the Hardware Update Wizard" window appears.
6
Check [No, not this time] and click [Next].
7
Select [Install the software automatically (Recommended)] and click [Next].
The driver will be installed.
8
Click [Finish].
9
Click [Close] to close the properties window.
„
Installing the LAN Driver
Perform the following procedures on each [Ethernet controller] under [Other devices] in [Device
Manager].
1
Insert the driver disk created from the ServerStart CD-ROM into the server.
2
Double-click [Ethernet controller] under [Other devices].
The properties window for the Ethernet controller appears.
table: LAN device name
LAN cards LAN device name
Onboard LAN (1000BASE-T) Broadcom NetXtreme Gigabit Ethernet
PG-1882L Intel(R) PRO/1000 MF Server Adapter
PG-1892L Intel(R) PRO/1000 MT Server Adapter
PG-2861L Intel(R) PRO/1000 PT Dual Port Server Adapter
PG-289L Intel(R) PRO/1000 PT Server Adapter