Fujitsu Primergy TX120, User Manual

Page: 107 / 263

107
PRIMERGY TX120 User’s Guide
4
Manu
al OS In
st
a
llation
„
For Windows Server 2003
*1: Created by the ServerStart FloppyBuilder function
4.1.2 How to Create Driver Disks [FloppyBuilder function]
Driver disks are created from the ServerStart CD-ROM using the ServerStart FloppyBuilder function.
The FloppyBuilder function is available in the following environments.
• Starting up the ServerStart system on a client computer (Recommended)
• Starting up the system from the ServerStart CD-ROM on the server
`
When creating driver disks on a client computer, it is necessary to install ServerStart on the client
computer beforehand. Install it according to "2.4 Preparation for Using ServerStart on a Client
Computer" (
J
pg.46).
If a different version of ServerStart has been installed, uninstall it and install the proper version. For
details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" (
J
pg.48).
„
Starting ServerStart
If ServerStart has already been started, you do not have to restart it. If it is not started, perform the
following startup procedures.
table: Drivers Required for Installing Windows Server 2003
Expansion card / onboard controller Driver
Chipset Driver provided with the Server Start CD-ROM
Graphic controller Standard driver provided with the OS
Onboard SAS controller Integrated Mirroring SAS Driver Windows 2000/2003 Drivers
Disk V1.21.13L10
*1
Onboard LAN TX120 Onboard LAN Driver Windows 2003 Drivers Disk
Ver9.25.0.0
*1
LAN card (PG-1882L/PG-1892L)
PG-185x/186x/188x/189x LAN Driver Windows 2000/2003
Drivers Disk Ver10.3
*1
LAN card (PG-2861L/PG-289L)
PG-286x LAN Driver Windows 2000/2003 Drivers Disk
Ver10.3
*1
SCSI card (PG-1301L) Standard driver provided with the OS
Other expansion cards Driver supplied with the expansion card