54
Operating Manual
TX100 S2 Core Edition
Installation and operation
Ê
After integrating your PRIMERGY TX100 S2 Core Edition server into the
destination network, use any connected client to check whether your server
is available in the local network neighborhood.
5.2.4.3
Providing computer name and domain
I
It is highly recommended to change the default computer name in order
to eliminate the possibility of a naming conflict with existing network
objects.
Ê
Under
Provide Computer Information
, click
Provide computer name and domain
.
I
If the
Initial Configuration Tasks
pane is not available, proceed as
follows:
Ê
Click
Start
, right-click
My Computer
, and then click
Properties
.
Ê
In the
Computer Name
tab add a computer description (optional) and click
Change
to alter the default computer name and domain settings.
Ê
Enter your preferred computer name.
Ê
In the
Member of
section change or confirm the workgroup name.
By default, your server has been joined to a workgroup called "Workgroup".
Ê
In order to join your server to a domain, select the radio button next to
Domain
and enter the preferred domain name.
I
When joining your PRIMERGY TX100 S2 Core Edition server to a
domain, please consider the following restrictions of the pre-installed
Windows Server 2008 R2 Foundation operating system:
–
Your server can only be joined at the root of the domain and can’t
be used to create child domains. In case joined to a child domain
or used to create a child domain the server will display a warning
and if not rectified will shut down in 10 days.
–
The domain containing Windows Server 2008 R2 Foundation
must not have trust relations with another domain. In case the
domain does have trust relationships the server will display a
warning message and if not rectified will shut down in 10 days.
Ê
Click
OK
.
I
Once you click the
OK
button you will receive a message that the
computer must be restarted. Close the
System Properties
menu, then
click
Restart Now
to apply the changes.
