Fujitsu PRIMERGY SX10 S2, User Manual

Page: 88 / 94

88
A.1
For the United States and Canada
Use a UL listed and CSA labeled cable set consisting of a three conductor cable with a maximum
length of 15 feet. For units which stand on a desk or table, type SVT or SJT cable sets should be used.
For units which stand on the floor, only SJT type cable sets should be used. The cable set must be
selected according to the current rating for your unit. Please consult the table below for the selection
criteria for power cables used in the United States and Canada.
For units set at 230 V (outside of the United States and Canada):
Use a cable set consisting of a minimum AWG according to the table above and a grounding type
attachment plug rated 15 A, 250 V. The cable set should have the appropriate safety approvals for the
country in which the equipment will be installed and should be marked HAR.
Cable
Type
Size of Conductors in Cable Maximum Current Rating of Unit
SJT 18 AWG
16 AWG
14 AWG
10 Amps
12 Amps
12 Amps
SVT 18 AWG
17 AWG
10 Amps
12 Amps
• Parallel
For units set at 115 V:Use a parallel blade,
grounding type attachment plug rated 15 A,
125 V.
• Tandem
For units set at 230 V:Use a tandem blade,
grounding type attachment plug rated 15 A,
250 V.