Fujitsu PRIMERGY RX600 S4, User Manual

Page: 25 / 230

25
PRIMERGY RX600 S4 User's Guide
1.3.2 Server (rear view)
a
USB connector ( )
Connect peripheral equipments conforming to the USB standard (2.0 or 1.1).
b
Video connector ( )
Connect a display cable.
c
Serial port connector ( )
Connect a cable of peripheral equipment conforming to the RS-232C standard such as a modem.
d
PCI slot
Install expansion cards.
e
Service LAN port
The LAN port is for the Remote Management Controller. The Remote Management Controller
function can be used on a web interface by connecting a LAN cable. For details on how to use the
Remote Management Controller, refer to "Appendix E Remote Management Controller"
(
J
pg.220).
f
I/O riser card LAN port
The LAN ports are on an I/O riser card. Connect Unshielded Twisted Pair (UTP) cables.
Available cables and indications of LEDs are the same as that of the onboard LAN port.
a
b c
h
i
g
f
d e
m m l k j n k j
+
㪣㪜㪛㩷㪘
㪣㪜㪛㩷㪙