Fujitsu PRIMERGY RX600 S3, User Manual, Page: 219 / 305

219
PRIMERGY RX600 S3 User's Guide
1
2
3
4
5
6
7
9
8
Inst
alling Internal
Options
7.6.2 Installable Internal Hard Disk Units and Notes
Before installing an internal hard disk unit, check the following points.
„
Installable Internal Hard Disk Units
The following types of SCSI hard disks can be installed in this server.
„
Notes
Note the following points to avoid failures:
• Inside the hard disk unit, the disk for storing data is rotating at high speed to read and write data.
Because the hard disk is a very delicate device, do not move, strike, or shake the server when it is
turned on.
• Do not bang the hard disk or put metal objects on it.
• Do not use or store the device in a location affected by extreme temperature changes.
• Keep the device away from direct sunlight and from radiators and other heat sources.
• Use or store the device on a shock-and-vibration free surface.
• Do not use or store the device in a humid or dusty place.
• Do not use or store the device near magnets or devices that generate strong magnetic fields.
• Do not disassemble or take the device apart.
• Keep the disk away from condensation or water droplets.
` Mishandling the hard disk could result in destruction of the data stored on the disk. Make sure to keep
a backup of important data. Even with hard disks of the same type, there could be a slight difference in
storage capacity. We recommend backing up data on the basis of files or sectors rather than hard
disks.
table: Installable Internal Hard Disk Units
Disk capacity Model number Overview
73.4GB PG-HDH71W Ultra320 SCSI, 10,000rpm
73.4GB PG-HDH75W Ultra320 SCSI, 15,000rpm
146.8GB PG-HDH41W Ultra320 SCSI, 10,000rpm
146.8GB PG-HDH45W Ultra320 SCSI, 15,000rpm
300GB PG-HDH31W Ultra320 SCSI, 10,000rpm