Fujitsu PRIMERGY RX600 S3, User Manual, Page: 216 / 305

216
Chapter 7 Installing Internal Options
6
Firmly press the expansion card or the PCI card holder into the connector of the
PCI slot and rotate the retention latch to the down position to lock.
When installing a card in Slot 1 through 5, install the PCI card holder. Rotate the PCI card holder
cover and the retention latch to the down position and slide down the PCI card holder handle.
7
Install the top cover.
7.5.4 How to Replace Expansion Cards in the Hot-
Swappable PCI Slots
This section describes how to replace expansion cards by PHP function.
` Always contact your maintenance engineer to replace expansion cards by PHP function. This
operation must be performed by the maintenance engineer.
` This operation is only available when the OS is Windows Server 2003. Note that, if it is performed
under another OS, the system may go down.
1
Disconnect the failed expansion card on OS.
1. Double-click the “Unplug/Eject” icon in the taskbar at the right-bottom corner of the
desktop.
The “Unplug or Eject Hardware” wizard appears.
2. Click [Stop].
3. Select the expansion card to be removed and click [OK].
A message appears saying that the expansion card has been disconnected, and the card can
be removed.