manualshive.com logo in svg

Fujitsu PRIMERGY RX600 S3, User Manual, Page: 156 / 305

Share
Download
Fujitsu PRIMERGY RX600 S3 User Manual Download Page 156

156

Chapter 5  Operations after OS Installation

5.5 Notes Before Operating the 

Server

This section explains the settings required before starting to operate the server.

`

For details on the settings, refer to the following URL.
http://www.microsoft.com/technet/prodtechnol/exchange/2003/Library/default.mspx

• If a LAN card was added, install a driver according to "4.3 Installing the LAN Driver" (

J

pg.129).

• When connecting a SCSI optional device (such as a hard disk cabinet or DAT), connect it according 

to "Chapter 7 Installing Internal Options" (

J

pg.181).

• For the settings for the installed applications supplied with the product, refer to the manuals of each 

application.

5.5.1 Applying the Hotfix

A hotfix needs to be applied in order to operate the server. For the hotfix, use the "ServerStart Disc 1 
CD-ROM" supplied with the server. 

„

Installing Windows 2000 Server

To install Windows 2000 Server directly, you have to use Service pack 4 integrated OS media or install 
Service Pack 4 or newer Service Pack. 
And please install hotfix module named KB904374 after OS installation. 
Please find out hotfix module of your language version from the following folder on ServerStart CD. 
[CD-ROM drive]: \HOTFIX\W2K\

Summary of Contents for PRIMERGY RX600 S3


















































































































































































































































































































Reviews:

No comments