Fujitsu PRIMERGY RX600 S3, User Manual, Page: 129 / 305

129
PRIMERGY RX600 S3 User’s Guide
4
Manu
al OS In
st
a
llation
4.3 Installing the LAN Driver
This section explains the procedure for installing the driver.
In addition to the case where the OS is installed manually, the driver must be installed
when a LAN card is added.
„
Checking the LAN device after OS installation
For Windows Server 2003 x64 and Windows Server 2003, the LAN driver installation procedure differs
depending on whether the network adapter was recognized during the OS installation. Check whether or
not a recognized network adapter is present by the following procedures in advance.
1
Click [Start]
→
[Administrative Tools]
→
[Computer Management].
2
Click [Device Manager].
On the Device Manager list, check if a recognized network adapter is present.
(Window example)
When a recognized network adapter is present, [Network adapters] appears.
z
When a recognized network adapter is present
Perform Updating LAN Driver on the LAN device name under [Network adapters], then Installing the
LAN Driver on [Ethernet controller] under [Other devices].
Recognized
network adapter
Unrecognized
network adapter