Fujitsu PRIMERGY RX600 S3, User Manual

Page: 255 / 305

255
PRIMERGY RX600 S3 User’s Guide
8
Con
figurin
g Hardwa
re
a
nd Utilitie
s
8.3.10 Console Redirection Submenu
Settings for console redirection are configured on the [Console Redirection] submenu.
8.3.11 BMC Information Submenu
The information on BMC (Baseboard Management Controller) is displayed.
table: Items on the Console Redirection Submenu
Item Settings Description
COM1 Console Redirection
Console Redirection • Enabled
• Disabled (initial value) Set whether or not to enable the console
redirection.
Flow Control • None (initial value)
• RTS/CTS
• XON/XOFF
• RTS/CTS + CD Set the flow control of console redirection.
Bit Rate • 9.6k
• 19.2k (initial value)
• 38.4k
• 57.6k
• 115.2k Set the bit rate.
Terminal Type • PC-ANSI
• VT100
• VT100+ (initial value)
• VT-UTFB Set the terminal type when using console
redirection.
Console Redirection Mode • Standard (initial value)
• Enhanced
Set the execution mode for the console
redirection.
table: Items on the BMC Information Menu
Item Description
Board Part Number The revision of board is displayed.
Board Serial Number The serial number of board is displayed.
System Part Number The parts number of the server is displayed.
System Serial Number The serial number of the server is displayed.
Chassis Part Number Nonuse
Chassis Serial Number Nonuse
BMC Firmware Revision The firmware revision of BMC is displayed.
SDR Revision
The revision of SDR is displayed.