Fujitsu Primergy RX600 S2, User Manual

Page: 212 / 299

212
Chapter 7 Installing Internal Options
6
Firmly press the expansion card or the PCI card holder into the connector of the
PCI slot and rotate the retention latch to the down position to lock.
When installing a card in Slot 1 through 5, install the PCI card holder. Rotate the PCI card holder
cover and the retention latch to the down position and slide down the PCI card holder handle.
7
Install the top cover.
7.5.4 How to Replace Expansion Cards in the Hot-
Swappable PCI Slots
This section describes how to replace expansion cards by PHP function.
Always contact your maintenance engineer to replace expansion cards by PHP function. This
operation must be performed by the maintenance engineer.
This operation is only available when the OS is Windows Server 2003. Note that, if it is performed
under another OS, the system may go down.
1
Disconnect the failed expansion card on OS.
1. Double-click the “Unplug/Eject” icon in the taskbar at the right-bottom corner of the
desktop.
The “Unplug or Eject Hardware” wizard appears.
2. Click [Stop].
3. Select the expansion card to be removed and click [OK].
A message appears saying that the expansion card has been disconnected, and the card can
be removed.