Fujitsu Primergy RX300 S4, User Manual

Page: 94 / 267

94
Chapter 4 Operations after OS Installation
4.4.3 Creating "Server Management Tools" disk
Start up ServerStart and confirm that the FloppyBuilder window is displayed.
1
Click [Server Management Tools].
2
Click the tool to be created.
Insert the prepared floppy disk by following the message.
3
Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The respective tools will be created automatically. When a message appears indicating that the
disk is created, click [OK] and eject the disk.
4
Fill the following items on the label of the floppy disk.
• The model of the server
• Version and Level of the Server Management Tools
• Date of the floppy disk created
4.4.4 Creating Driver Disks
Obtain floppy disks as many as the drivers to be created before taking the procedures below.
Start up ServerStart and confirm that the FloppyBuilder window is displayed.
1
Click [Drivers Diskettes (for OS)].
The [FloppyBuilder Driver Disk] window appears.
2
Click the type of the driver to be created.
3
Click the driver disk to be created.
Follow the message and insert a floppy disk.
4
Perform the subsequent operations according to the messages on the
windows.
The floppy disk will be formatted automatically and file copying will start.
The driver disk is automatically created. When a message appears indicating that creating the
disk is completed, click [OK] and eject the floppy disk.