Fujitsu Primergy RX300 S4 User Manual Download Page 57

Page: 57 / 267

PRIMERGY RX300 S4 User's Guide

3.2 Expert Mode

In the expert mode, start up Disk Manager, format the installation partition, and install

the OS. Use this mode only when you want to perform installation while maintaining

the existing partitions.

Windows Server 2008 cannot be installed in Expert mode.

Confirm that the USB floppy disk drive is connected before turning on the server power.

3.2.1 Starting Up the Expert Mode

Start up the expert mode.

Turn on the server and insert PRIMERGY Startup Disc immediately.

ServerStart starts up. The select-media window for the configuration file appears.

Summary of Contents for Primergy RX300 S4












































































































































































































































































Search results

Summary of Contents for Primergy RX300 S4

Reviews:

Related manuals for Primergy RX300 S4

Brands by name

Popular brands

Fujitsu Primergy RX300 S4, User Manual

Search results

Summary of Contents for Primergy RX300 S4

Reviews:

Related manuals for Primergy RX300 S4

Brands by name

Popular brands