Fujitsu Primergy RX300 S4, User Manual

Page: 258 / 267

258
Appendix
D.3 Window of the Remote Management Controller
The Remote Management Controller uses the Web interface function.
The following window appears when starting the Remote Management Controller.
The following functions are available.
table: Functions of the Remote Management Controller
Item Description
System Information
Displays information of the system on which the Remote Management
Controller is running.
iRMC S2 Displays the Remote Management Controller information and
configures the controller.
Power Management Sets the power supply control.
Power Consumption Displays server power information.
Sensor Displays the status of each server sensor such as fan, temperature and
power supply.
System Event Log Displays the system event log stored on the baseboard.
Server Management Displays server management information.
Network Settings Configures network settings of the Remote Management Controller.
Alerting Configures the SNMP trap and alert mail settings.
User Management Sets information of user logging on the Remote Management Controller.
Console Redirection Configures the console redirection and starts it up.
Remote Storage Displays the Remote Storage unit status, and configures the Remote
Storage Server.
iRMC S2 SSH Access Displays the iRMC SHH Access window.
iRMC S2 Telnet Access Displays the iRMC Telnet Access window.
Logout Logs out from the session of the Remote Management Controller Web
interface.
Refresh Refreshes the Web interface window of the Remote Management
Controller.