Fujitsu Primergy RX300 S4, User Manual

Page: 198 / 267

198
Chapter 7 Configuring Hardware and Utilities
LAN Settings submenu
Use this submenu to set the LAN when remote controlled by the RemoteControlService.
7.2.11 Security Menu
The Security menu sets the security options.
table: Items on the LAN Settings Submenu
Item Setting Description
DHCP • Disabled (Initial value)
• Enabled Sets whether or not to acquire LAN IP address of
iRMC from the DHCP server.
Local IP address Sets the IP address of the iRMC.
Subnet mask Enter the subnet mask of the onboard LAN specified in [Local IP address].
Gateway address Enter the gateway address of the onboard LAN specified in [Local IP address].
Service LAN
• Disabled
• Enabled (Initial value)
Sets whether to enable Service LAN.
Service LAN Port
Service (Unchangeable)
Sets Service LAN.
This item appears when [Enabled] is selected for
[Service LAN].
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu Change Values
Select > Sub-Menu -/+
Enter
Advanced Security Server Exit Main
Setup Password
System Password
Set Setup Password:
Setup Password Lock:
Set System Password:
System Password Mode:
System Load:
Setup Prompt:
Virus Warning:
Diskette Write:
Flash Write:
Not Installed
Not Installed
[Press Enter]
[Standard]
[Press Enter]
[System]
[Standard]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
TPM (Security Chip) Setting >