Fujitsu Primergy RX300 S4, User Manual

Page: 102 / 267

102
Chapter 4 Operations after OS Installation
4.6
LAN Driver Advanced Setup [BACS]
BACS is an integrated GUI application consisting of programs such as Broadcom
Advanced Server Program (BASP) that provides load balancing features, etc., by
teaming up multiple adapters.
BACS is used in the following situations:
• When using the teaming (load balance) function between onboard LANs.
• When setting up a VLAN using the onboard LAN
• When performing advanced setup of the onboard LAN
The teaming function cannot be performed between a LAN card and the onboard LAN.
In Windows Server 2008 Server Core installation environment, BACS cannot be installed.
The diagnostic function that is started from the [Diagnostics] tab cannot be used on BACS.
Use of Intel® PROSet
Use Intel
®
PROSet ( p.118) to perform the following advanced setup of a LAN card:
• When performing the teaming function between LAN cards
• When setting up a VLAN using a LAN card
• When performing advanced setup of a LAN card
4.6.1 .NET framework Installation
When using Broadcom Control Suite in Windows Server 2003/2003 x64, ".NET framework" must be
installed in the server.
When a newer version than ".NET framework2.0" is not installed in the server, install the .Net
framework 3.5 according to the following procedure.
1
Execute the following file contained in the PRIMERGY Startup Disc.
[CD/DVD drive]:\PROGRAMS\General\Microsoft\NET framework\dotnetfx35.exe
The installer starts up.
The .NET framework 3.5 installation wizard appears.
2
Check the contents, select [ACCEPT], and click [Install].
Installation starts.
3
When the installation completion window appears, click [Exit].