Fujitsu Primergy RX300 S3, User Manual, Page: 62 / 313

62
Chapter 3 OS Installation Using ServerStart
■ Installation While Maintaining the Established RAID Environment
1
Select [Logical Drive View] on the [Configuration for Disks and RAID
Controllers] window.
Add a partition
1. Click [Add Partition].
A partition is added.
Add required partitions.
2. Click [Details] and modify the settings as necessary.
The partition configuration is displayed. As the default values are configured, confirm the
settings and modify them as necessary.
Partition size of the FAT file system
When "FAT" is selected in [File system] and a value equal to or more than 4090MB or "Auto-
matic setting" is specified in [Partition size], the size of created partitions will be 4090MB.
The following limits apply to the volume label length. A volume label longer than the limit may
be used. However, it can cause installation failure. Enter a volume label within the limit.
• FAT: Up to 11 characters
• NTFS: Up to 32 characters