Fujitsu PRIMERGY RX2560 M2, Upgrade And Maintenance Manual

Page: 139 / 568

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
139
Basic software procedures
Ê
From the Fast!UTIL Options menu, select Configuration Settings , and press
[Enter]
.
Ê
From the Configuration Settings menu, select Adapter Settings , and press
[Enter]
.
Ê
Note down the new 16-digit WWN address found under Adapter Port Name .
Ê
Press
[Esc]
to return to the main menu and exit the QLogic BIOS utility.
Ê
Inform the customer about the changed WWN address.
5.2.18 Using the Chassis ID Prom Tool
The Chassis ID EPROM located on a dedicated Chassis ID board or on your
server’s front panel board contains system information like server name and
model, housing type, serial number and manufacturing data.
In order to integrate your system into the ServerView management environment
and to enable server installation using the ServerView Installation Manager,
system data needs to be complete and correct.
After replacing the Chassis ID EPROM, system information has to be entered
using the Chassis ID Prom tool. The tool and further instructions are available
to maintenance personnel from the Fujitsu Technology Solutions Extranet:
https://partners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/
Ê
Select your PRIMERGY system from the main area of the page.
Ê
From the categories selection, choose Software & Tools Documentation .
Ê
In the Tools area click Tools: Chassis-IDProm Tool to download the file
( tool-chassis-Idprom-Tool.zip ).
I
For the Japanese market, follow the instructions provided separately.
Note on Advanced Thermal Design (ATD)
I
If the Advanced Thermal Design (ATD) option is available and has been
enabled for your server, please set information within the Chassis ID
Prom Tool accordingly.
The ATD option can only be ordered from the manufacturer as a factory
preset. To find out if your server is ATD-enabled, check for the ATD logo
on the identification rating plate.
For ATD logo and further information on Advanced Thermal Design
(ATD), please refer to your server’s operating manual.