Fujitsu PRIMERGY RX2560 M2, Upgrade And Maintenance Manual

Page: 133 / 568

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
133
Basic software procedures
Ê
Select the Main menu.
Ê
Under System Time and System Date specify the correct time and date.
I
By default, the system time set in the BIOS is RTC (Real Time Clock)
local time. If your IT infrastructure relies on universally accepted time
standards, set the
System Time to UTC (Universal Time, Coordinated)
instead. Greenwich Mean Time (GMT) can be considered equivalent
to UTC.
Ê
Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify settings,
refer to the corresponding BIOS Setup Utility reference manual
5.2.13 Viewing and clearing the System Event Log (SEL)
5.2.13.1 Viewing the SEL
You can view the System Event Log (SEL) using the ServerView Operations
Manager or the ServerView iRMC web frontend:
Viewing the SEL in ServerView Operations Manager
Ê
In ServerView Operations Manager Single System View select Maintenance
from the Information / Operation menu.
Ê
Under Maintenance select System Event Log .
Ê
Select the message type(s) you want to display:
– Critical events
– Major events
– Minor events
– Informational events
I
Note on the SVOM Driver Monitor
The Driver Monitor view gives you an overview of the monitored
components as well as the associated events contained in the system
event log on the managed server.
Under Monitored Components the monitored components are listed. If a
component has the status Warning or Error , you can select it in the list
and click Acknowledge . This confirms the event on the server side. You