Fujitsu PRIMERGY RX2540 M4, Upgrade And Maintenance Manual

Page: 92 / 639

92 Upgrade and Maintenance Manual
RX2540 M4
Basic software procedures
Ê
Ask the system administrator to suspend BitLocker-protection on the system
volume, using the
BitLocker Drive Encryption control panel item.
I
This will temporarily disable BitLocker for maintenance purposes.
The volume will not be decrypted and no keys will be discarded.
Ê
Click Start - Control Panel - System and Security - BitLocker Drive
Encryption to open the BitLocker Drive Encryption.
Ê
Select the system volume, and click Suspend Protection .
Ê
Click Yes to confirm that your data will not be protected while BitLocker
is suspended.
I
In order to determine which features are accessible through the
BitLocker setup wizard, it may be necessary to modify the BitLocker
Group Policy settings.
For more information on how to suspend BitLocker drive encryption, see
the Microsoft TechNet library at
http://technet.microsoft.com/library/cc731549.aspx.
For more information, see the Fujitsu web pages.
5.1.2 Disabling the boot watchdog
The boot watchdog determines whether the operating system boots within a
preset time frame. If the watchdog timer expires, the system will automatically
reboot.
If the system is to be started from removable boot media for firmware upgrade
purposes, the boot watchdog needs to be disabled before starting maintenance
task. Otherwise, the boot watchdog might initiate a system reboot before the
flash process is complete.
V
CAUTION!
An incomplete firmware upgrade process may render the server
inaccessible or result in damaged/destroyed hardware.
Timer settings can be configured in the BIOS or using the ServerView iRMC
web interface.
Disabling the boot watchdog in the BIOS
Ê
Enter the BIOS.