Fujitsu PRIMERGY RX2520 M5, Operating Manual

Page: 52 / 98

52 Operating Manual
RX2520 M5
Starting up
5.1 Installation steps, overview
Ê
First of all, carefully read the safety instructions in "Important information" on
page 39 and following.
Ê
Transport the server to the place where you want to set it up.
Ê
Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note, see
"Unpacking the server" on page 54 .
Ê
Ensure that you have all necessary manuals, see "Documentation overview"
on page 11 ; print out the PDF files if required.
Ê
Components that have been ordered additionally may be delivered loose
with the server. For installing, see the original component documentation.
Ê
Install the server in the rack, see section "Installing the server in the rack" on
page 55 .
Ê
Connect the devices to the server. To do this, see sections "Notes on
connecting/disconnecting cables" on page 60 and "Connecting devices to
the server" on page 61 .
Ê
Connect the server to the mains, see section "Connecting the power cord"
on page 62 .
Ê
If applicable, install the HDD/SSD modules, see "Installing HDD/SSD
modules" on page 74 .
Ê
If applicable, install a second PSU, see "Installing a second PSU" on
page 78 .
Ê
Familiarize yourself with the controls and indicators on the front and rear of
the server, see section
"Connectors, controls and indicators" on page 24 .