Fujitsu PRIMERGY RX2520 M4, Upgrade And Maintenance Manual, Page: 92 / 456

92 Upgrade and Maintenance Manual
RX2520 M4
Basic software procedures
I
This information is only available with the iRMC S5 or above.
Only network controllers supporting the Command Line Protocol
(CLP) will be displayed.
Ê
Inform the customer about the changed MAC address.
5.2.16.2 Looking up WWN addresses
Emulex FC/FCoE adapters
Ê
Enable the network controller’s Option ROM in the BIOS as described in
section
"Enabling Option ROM scan" on page 77 .
Ê
Restart the server.
Ê
During boot, as soon as the Emulex BIOS utility option appears, press
[ALT]
+
[E]
or
[CTRL]
+
[E]
.
Ê
Under Emulex Adapters in the System you will find all available Emulex
adapters and their WWN addresses.
Ê
Note down the new 16-digit WWN address.
Ê
Press
[Esc]
to exit the Emulex BIOS utility.
Ê
Inform the customer about the changed WWN address.
QLogic FC adapters
Ê
Enable the network controller’s Option ROM in the BIOS as described in
section
"Enabling Option ROM scan" on page 77 .
Ê
Restart the server.
Ê
During boot, as soon as the QLogic BIOS utility option appears, press
[ALT]
+
[Q]
or
[CTRL]
+
[Q]
.
Ê
Under Select Host Adapter use the arrow keys
æ
/
Ë
to select the desired
FC/FCoE adapter and press
[Enter]
.
Ê
From the Fast!UTIL Options menu, select Configuration Settings , and press
[Enter]
.
Ê
From the Configuration Settings menu, select Adapter Settings , and press
[Enter]
.
Ê
Note down the new 16-digit WWN address found under Adapter Port Name .