Fujitsu PRIMERGY RX2520 M4, Upgrade And Maintenance Manual, Page: 50 / 456

50 Upgrade and Maintenance Manual
RX2520 M4
Basic hardware procedures
4.4 Getting access to the component
V
CAUTION!
●
Only for non-hot plug components:
Before removing or attaching covers, turn off the server, all peripheral
devices, and any other connected devices. Because there is a risk of
electric shock or damage, please disconnect all power cords from the
outlet.
●
The top cover must be replaced as soon as possible for purposes of
cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
●
For more safety information, see chapter "Important information" on
page 33 .
4.4.1 Extending the server out of the rack
V
CAUTION!
●
Use the anti-tilt plate to prevent the rack from tipping when installing
the rack. Pulling the server out of the rack without having installed the
anti-tilt plate may cause the rack to tip over.
●
Be careful not to pinch fingers or clothes when sliding out the server
or pushing it back. Failure to do so may cause injury.
●
For more safety information, see chapter "Important information" on
page 33 .
Ê
Remove all remaining external cables from the rear I/O panel and expansion
cards.
Ê
If you are not using a cable mounting arm (CMA kit), ensure that the rear
cables are long enough not to be strained or damaged when extending the
server out of the rack.