5
Basic software procedures
5.1
Starting the maintenance task
5.1.1
Backing up the setting information of BIOS or
BMC
Record or backup the important system configuring data, so that the settings
other different to the standard settings of BIOS or BMC will not be lost when
the service personnel replaces the system board.
5.1.2
Verifying and configuring the backup software
solution
This task only applies to Japan.
Depending on the backup software solution, it may be necessary to disable or
delete the backup drive from the backup software drive list before starting the
maintenance task.
For more information on suitable backup software solutions and related
documentation, see the Fujitsu web pages.
5.1.3
Switching on the ID indicators
For easy identification of the server, switch on the ID indicators, especially
when working in a datacenter environment or a server room. The ID indicators
can also be activated using IPMI.
Using the ID button on the I/O panel
▶
Press the ID button on the I/O panel to switch on the ID indicators.
RX2450 M1
Upgrade and Maintenance Manual
67
Summary of Contents for PRIMERGY RX2450 M1
