RX200 S3
Operating Manual
57
Startup and Operation
Cleaning the Server
5.4
Cleaning the Server
V
CAUTION!
Switch the server off and disconnect the power plug(s) from the
grounded shockproof socket(s).
Do not clean any interior parts yourself; leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server and the monitor are clear.
Clean the keyboard and the mouse with a disinfecting cloth.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a
cloth that has been moistened in a mild domestic detergent and then carefully
wrung out.
