Fujitsu PRIMERGY RX200 S2, User Manual, Page: 222 / 307

222
Chapter 8 Hardware Configuration/Utilities
8.2.10 Security Menu
Configures the security features.
table: Items on the Security Menu
Item Setting Description
Setup Password/
System Password
- Displays whether or not each password is set.
[Not installed] appears when the password is not
set, and [Installed] appears when it is set.
Set Setup Password [Enter] Sets a setup password. The setup password prevents
unauthorized startup of the BIOS Setup Utility.
For procedures for setting, changing, and deleting
the password, refer to "9.4.2 Security against
Unauthorized Use" (
pg.272).
Set System Password [Enter] Sets a system password. The system password
prevents unauthorized access to the system.
A setup password must be specified.
For procedures for setting, changing, and deleting
the password, refer to "9.4.2 Security against
Unauthorized Use" (
pg.272).
Setup Password Lock • Standard (at the time of
purchase)
• Extended
Sets the scope protected by the setup password.
A setup password must be specified.
• Standard
You will be requested to enter the setup password
while the BIOS Setup Utility is starting up.
• Extended
You will be requested to enter the setup password
when the BIOS Setup Utility starts up. The BIOS
for the expansion cards is locked during POST.
System Password Mode System Sets the scope protected by the system password. A
setup password and a system password must be
specified.
SETUP prompt • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to display a setup message
"<F2> BIOS Setup" in the [POST] window when
the system restarts.
Item Specific Help
PhoenixBIOS Setup Utility
Main Advanced Security Server Exit
Setup Password Not installed
System Password Not installed
Set Setup Password: [Enter]
Set System Password: [Enter]
Setup Password Lock: [Standard]
SETUP prompt: [Enabled]
Virus Warning: [Disabled]
System Load: [Standard]
Diskette Write: [Enabled]
Flash Write: [Enabled]
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values -/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit
System Password Mode: [System]