50
Operating Manual
RX1330 M3
Hardware installation
5.3
Connecting devices to the server
The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed.
I
Some of the devices that can be connected may require special
software, e.g. drivers (see the documentation for the connected device).
Figure 2: Ports on the front
The following connectors are located on the front of the server:
A front VGA connector is available as an option
10 HDD variant
For the variant with 10 HDDs of the PRIMERGY RX1330 M3 there is an
USB 2.0 connector on the front panel on QRL instead of above mentioned
USB3.0 connectors.
Figure 3: Front panel on QRL
1
2 x USB 3.0 connectors
1
1 x USB 2.0 connector
햲
Summary of Contents for PRIMERGY RX1330 M3
