Fujitsu Primergy RX100 S3, User Manual, Page: 58 / 287

58
Chapter 3 OS Installation Using ServerStart
3.1.2 Open/create a Configuration File
Open a configuration file. Or create a new one.
1
Click [Start here to create a complete configuration file].
The [Open ServerStart Configuration File] window appears.
Once a configuration file is opened, another file cannot be opened until you click [Close and
save Configuration File].
2
Select the configuration file and click [Create].
The [RAID and Disk Wizard] starts up automatically ( "3.1.3 RAID and Disk Wizard" (pg.59)).