manualshive.com logo in svg

Fujitsu Primergy RX100 S3, User Manual

Share
Download
Fujitsu Primergy RX100 S3 User Manual Download Page 183

183

PRIMERGY RX100 S3 User’s Guide    

Inst
allin
g I

nte

rn

al O

pti

ons

7

7.3.3 How to Install/Remove Memory Modules

1

Turn off the power and remove the top cover.

"7.2 Removing and Attaching the Top Cover" (pg.178)

2

Touch a metal part of the server to discharge static electricity.

3

Install or remove memory modules.

• Installing

Insert a memory module properly into the memory slot. The levers close.

If the levers are not closed completely, push them with your fingers.

• Removing

Open the levers on both ends.

4

Check that the memory module is inserted all the way.

5

Attach the top cover.

"7.2 Removing and Attaching the Top Cover" (pg.178)

• Make sure not to open the clips outward too quickly because the memory            

module may pop up, which could cause damage.

• An improperly engaged memory module could cause a fire. Do not insert the            

memory module on the wrong side.

Lever

Align notch

Summary of Contents for Primergy RX100 S3
































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands