64
U41271-J-Z156-2-76
The Server Switches itself OFF
Problem Solutions and Tips
7.2
The Server Switches itself OFF
Server Management has Detected an Error
Ê
In the
ServerView
programme, check the error list or check the error log file
using the
SCU utility
, and attempt to eliminate the error.
7.3
The Monitor Remains Dark
Monitor is Switched OFF
Ê
Switch your monitor ON.
Power Saving Has Been Activated (Screen is Blank)
Ê
Press any key on the keyboard.
or
Ê
Deactivate screen blanking (screen saver). Enter the appropriate password.
Brightness Control is Set too Dark
Ê
Adjust the brightness control to increase the brightness. For detailed infor-
mation, please refer to the operating manual supplied with your monitor.
Power Cable or Monitor Cable not Connected
Ê
Switch OFF the monitor and the server.
Ê
Check whether the power cable is properly connected to the monitor and to
the power socket.
Ê
Check whether the monitor cable is properly connected to the server and
monitor (if it is connected with a plug). If a separate graphics card is installed
in the server, then the monitor cable must be connected to the connection
on this graphics card.
Ê
Switch ON the monitor and the server.
